Octafluorociclobutano

Octafluorocyclobutane has stable chemical properties, non-toxic and harmless, low global warming potential (GWP) value and zero ozone depletion index (ODP) value. It is a green and environmentally friendly special gas. Due to these good properties, octafluorocyclobutane has been widely used in technical fields such as high-voltage insulation, cleaning and etching, and plasma treatment in recent years.

Consulta
Manufacturing Process of Octafluorocyclobutane Application Areas and Purity Classification
Manufacturing Process of Octafluorocyclobutane Application Areas and Purity Classification

Proceso

Octafluorociclobutano can be produced by the dimerization of tetrafluoroethylene through pyrolysis, quenching, filtration, compression, etc; Octafluorocyclobutane can also be obtained by electrolysis of tetrafluorocyclobutane in anhydrous hidrógeno fluoride. Contacting crude octafluorocyclobutane containing impurities with an impurity decomposing agent at a high temperature and then contacting an adsorbent can substantially remove impurities such as fluorocarbons and obtain high-purity octafluorocyclobutane.
GasOctafluorociclobutano
Nº CAS.115-25-3
Pureza≥99.9%

Aplicaciones

Semiconductores

In Bosch dry etching processes, C4F8 acts as a passivation gas to protect the sidewalls of deep silicon trenches, significantly improving the anisotropy of silicon etching. It can also be used as an etching gas, suitable for etching silicon dioxide, silicon nitride, and other low-k dielectric materials. C4F8 is typically mixed with gases such as argon (Ar), oxygen (O₂), or nitrogen (N₂) to fine-tune the etching process.

Gas Insulation

Octafluorocyclobutane has a low GWP value (8900, only 37% of SF6), and the decomposition products under the action of arcs are fluorocarbons, which are non-toxic or low-toxic substances, and have a certain insulating arc extinguishing ability.

Química

According to the chemical properties of octafluorocyclobutane, it can also be used as the main raw material for other chemical products.

Refrigeration

In high-end applications where potential corrosion must be avoided, C4F8 can be used as a refrigerant.

Electrical Applications

C4F8 has a global warming potential one-third that of SF6, and its insulating strength in uniform electric fields is 1.11–1.80 times that of SF6. Therefore, C4F8 can be used as an insulating medium in high-voltage electrical equipment, replacing SF6 in some applications.

Fire Protection

In applications requiring water-free fire suppression, C4F8 can serve as a fire-extinguishing agent, particularly in fire suppression systems for precision electronic instruments.

Preguntas frecuentes

What product specifications do you provide?

Cylinder: 44L Valve: DISS 712 Filling weight: 50 kg

How is octafluorocyclobutane (C4F8) produced?

C4F8 is typically produced via chemical synthesis. The most common method involves reacting cyclobutane with fluorine in the presence of an appropriate catalyst to generate crude products, which are then refined through a series of physical purification processes to obtain high-purity electronic-grade C4F8.

Is octafluorocyclobutane a greenhouse gas?

Yes. C4F8 is a greenhouse gas with a global warming potential (GWP) of 3,400–9,700 (CO₂ equivalent) and an atmospheric lifetime of approximately 32 years.

What are the environmental impacts of C4F8?

C4F8 has an ozone depletion potential (ODP) of 0, so it does not harm the ozone layer. It is highly resistant to biodegradation, which may lead to long-term environmental accumulation. However, its bioaccumulation potential is low, and its impact on ecosystems is relatively limited.

Consulta

Active JavaScript en su navegador para rellenar este formulario.
Introduzca su correo electrónico de trabajo

Productos relacionados

Propileno
Más información

Nitrógeno (3N)
El nitrógeno se produce en grandes cantidades en las plantas de separación de aire que licúan y posteriormente destilan el aire en nitrógeno....
Más información

Óxido nitroso (5,5N)
El óxido nitroso se obtiene principalmente por descomposición térmica del nitrato de amonio. También puede obtenerse por...
Más información

Amoníaco (3N)
El amoníaco se fabrica mediante el proceso Haber-Bosch, que consiste en una reacción directa...
Más información

Amoníaco (7N)
El amoníaco se fabrica mediante el proceso Haber-Bosch, que consiste en una reacción directa...
Más información

Hexafluoruro de azufre
El hexafluoruro de azufre se fabrica por fluoración directa de azufre puro (elemental)...
Más información

Dióxido de carbono
El dióxido de carbono se recupera de muchas fuentes diferentes. Se obtiene como...
Más información

Oxígeno
El oxígeno se obtiene a escala comercial mediante la licuefacción y posterior destilación de
Más información

Argón
La fuente más común de argón es una planta de separación de aire. El aire contiene aprox...
Más información

Etileno
Los métodos de producción de etileno utilizados industrialmente incluyen el craqueo de hidrocarburos de petróleo
Más información

Acetileno
El acetileno se fabrica comercialmente por reacción entre el carburo de calcio...
Más información

Hidrógeno
El hidrógeno se produce con mayor frecuencia para su uso in situ mediante el reformado al vapor del gas natural. Estas plantas también pueden
Más información

Este sitio web utiliza cookies para mejorar su experiencia de navegación. Si continúa navegando, consideramos que acepta su uso.

Hable con nuestros expertos en gas....

Active JavaScript en su navegador para rellenar este formulario.
Introduzca su correo electrónico de trabajo